Excavator Ticket cost: course providers compared
We compared 8 excavator ticket providers. Published prices run $500 to $2,400, taken from each provider's own course page and sorted cheapest first. Nobody pays for their position.
Last checked 10 October 2026. Prices change, so confirm with the provider before you book.
Need the rules first? Read the excavator ticket key facts and FAQ.
Western Australia (3)
| Provider | Price | Duration | Delivery | Locations | Notes |
|---|---|---|---|---|---|
| Civil Safety RTO 32381 | $550 | Online theory (complete within 30 days) plus 1 day practical | blended | Mackay QLD, Gladstone QLD, Gold Coast QLD, Townsville QLD, Perth WA, Bunbury WA, Kalgoorlie WA, Newman WA | Price varies by session location. Cheapest session fees read on the page: Mackay, Gladstone and Gold Coast $550; Townsville $600; Perth, Bunbury and Kalgoorlie $650; Newman $785. Fees are read from the session table (first pages of upcoming sessions), so confirm at booking. The page says CSQ and CTF funding is available. |
| Saferight Training Academy RTO 5722 | $650 | 1 day (7:30am to 3:30pm) | face-to-face | Midland WA | Advertised sale price $650 (standard $700). Page says Construction Training Fund (CTF) funding applies to eligible WA workers, with an eligible-pay figure of $402. Minimum age 18. Saferight also sells a separate verification of competency (VOC) assessment for people who already hold an excavator ticket. |
| North Regional TAFE RTO 52788 | See site | 5 days (course page); Roebourne session listed as 27 to 30 October 2026 | face-to-face | Fitzroy Crossing WA, Roebourne WA | Skills Ready low-fee skill set for eligible WA residents. Estimated fees on the page: general $336.35 total ($259.20 tuition plus $77.15 resource), concession $153.95. Not counted as a headline price because eligibility rules apply. Sessions listed for Semester 2, 2026: Roebourne 27 to 30 October, Fitzroy Crossing 30 November to 4 December. |
- Civil Safety$550
- Duration
- Online theory (complete within 30 days) plus 1 day practical
- Delivery
- blended
- Where
- Mackay QLD, Gladstone QLD, Gold Coast QLD, Townsville QLD, Perth WA, Bunbury WA, Kalgoorlie WA, Newman WA
- RTO
- 32381
Price varies by session location. Cheapest session fees read on the page: Mackay, Gladstone and Gold Coast $550; Townsville $600; Perth, Bunbury and Kalgoorlie $650; Newman $785. Fees are read from the session table (first pages of upcoming sessions), so confirm at booking. The page says CSQ and CTF funding is available.
- Duration
- 1 day (7:30am to 3:30pm)
- Delivery
- face-to-face
- Where
- Midland WA
- RTO
- 5722
Advertised sale price $650 (standard $700). Page says Construction Training Fund (CTF) funding applies to eligible WA workers, with an eligible-pay figure of $402. Minimum age 18. Saferight also sells a separate verification of competency (VOC) assessment for people who already hold an excavator ticket.
- North Regional TAFESee site
- Duration
- 5 days (course page); Roebourne session listed as 27 to 30 October 2026
- Delivery
- face-to-face
- Where
- Fitzroy Crossing WA, Roebourne WA
- RTO
- 52788
Skills Ready low-fee skill set for eligible WA residents. Estimated fees on the page: general $336.35 total ($259.20 tuition plus $77.15 resource), concession $153.95. Not counted as a headline price because eligibility rules apply. Sessions listed for Semester 2, 2026: Roebourne 27 to 30 October, Fitzroy Crossing 30 November to 4 December.
Queensland (4)
| Provider | Price | Duration | Delivery | Locations | Notes |
|---|---|---|---|---|---|
| Coal Train Australia RTO 32507 | $500 | 2 days plus log book if required | face-to-face | Yeppoon QLD | Advertised price $500. Page says the course is fully funded under the Construction Skills Queensland (CSQ) program for eligible people, and RPL is not available under CSQ funding. Minimum age 17. |
| Civil Safety RTO 32381 | $550 | Online theory (complete within 30 days) plus 1 day practical | blended | Mackay QLD, Gladstone QLD, Gold Coast QLD, Townsville QLD, Perth WA, Bunbury WA, Kalgoorlie WA, Newman WA | Price varies by session location. Cheapest session fees read on the page: Mackay, Gladstone and Gold Coast $550; Townsville $600; Perth, Bunbury and Kalgoorlie $650; Newman $785. Fees are read from the session table (first pages of upcoming sessions), so confirm at booking. The page says CSQ and CTF funding is available. |
| TAFE Queensland RTO 0275 | $700 | Up to 2 days (8am to 4pm) | face-to-face | Cairns QLD, Townsville QLD (Bohle) | Full fee $700. |
| Australian Operator Training RTO 41351 | $1,500 | 2 days (07:30 to 15:30) | face-to-face | Emerald QLD | Advertised price $1,500. Primary site is Emerald, with training delivered throughout Queensland. Minimum age 16. The page still lists the old unit code RIIMPO301E, so confirm the current unit code (RIIMPO320, previously RIIMPO320F) with the provider. |
- Duration
- 2 days plus log book if required
- Delivery
- face-to-face
- Where
- Yeppoon QLD
- RTO
- 32507
Advertised price $500. Page says the course is fully funded under the Construction Skills Queensland (CSQ) program for eligible people, and RPL is not available under CSQ funding. Minimum age 17.
- Civil Safety$550
- Duration
- Online theory (complete within 30 days) plus 1 day practical
- Delivery
- blended
- Where
- Mackay QLD, Gladstone QLD, Gold Coast QLD, Townsville QLD, Perth WA, Bunbury WA, Kalgoorlie WA, Newman WA
- RTO
- 32381
Price varies by session location. Cheapest session fees read on the page: Mackay, Gladstone and Gold Coast $550; Townsville $600; Perth, Bunbury and Kalgoorlie $650; Newman $785. Fees are read from the session table (first pages of upcoming sessions), so confirm at booking. The page says CSQ and CTF funding is available.
- TAFE Queensland$700
- Duration
- Up to 2 days (8am to 4pm)
- Delivery
- face-to-face
- Where
- Cairns QLD, Townsville QLD (Bohle)
- RTO
- 0275
Full fee $700.
- Duration
- 2 days (07:30 to 15:30)
- Delivery
- face-to-face
- Where
- Emerald QLD
- RTO
- 41351
Advertised price $1,500. Primary site is Emerald, with training delivered throughout Queensland. Minimum age 16. The page still lists the old unit code RIIMPO301E, so confirm the current unit code (RIIMPO320, previously RIIMPO320F) with the provider.
New South Wales (1)
| Provider | Price | Duration | Delivery | Locations | Notes |
|---|---|---|---|---|---|
| Edway Training RTO 91401 | See site | 2 days (8:45am to 4:00pm) | face-to-face | Seven Hills NSW | Lists the previous code RIIMPO320F. No price is shown on the course page we read, so none is shown here. The only dates shown when we read were 14 and 15 July 2026, so check current dates. |
- Edway TrainingSee site
- Duration
- 2 days (8:45am to 4:00pm)
- Delivery
- face-to-face
- Where
- Seven Hills NSW
- RTO
- 91401
Lists the previous code RIIMPO320F. No price is shown on the course page we read, so none is shown here. The only dates shown when we read were 14 and 15 July 2026, so check current dates.
Northern Territory (1)
| Provider | Price | Duration | Delivery | Locations | Notes |
|---|---|---|---|---|---|
| CfAT Training RTO 0857 | $2,400 | 5 days (about 7 hours each day) | face-to-face | Alice Springs NT | Advertised price $2,400 including a $29 non-refundable admin fee. Page points to a government subsidy eligibility check. |
- CfAT Training$2,400
- Duration
- 5 days (about 7 hours each day)
- Delivery
- face-to-face
- Where
- Alice Springs NT
- RTO
- 0857
Advertised price $2,400 including a $29 non-refundable admin fee. Page points to a government subsidy eligibility check.
Where to next
- White Card providers Compare White Card course prices and delivery.
- Standard 11 providers Compare Standard 11 course prices and delivery.
- Working at Heights providers Compare Working at Heights course prices and delivery.
- Confined Space providers Compare Confined Space course prices and delivery.
- EWP providers Compare EWP course prices and delivery.
- Rigging providers Compare Rigging course prices and delivery.
- Dogging providers Compare Dogging course prices and delivery.
- Forklift providers Compare Forklift course prices and delivery.
- First aid providers Compare First aid course prices and delivery.
- LR licence providers Compare LR licence course prices and delivery.
- MR licence providers Compare MR licence course prices and delivery.
- HR licence providers Compare HR licence course prices and delivery.
- HC licence providers Compare HC licence course prices and delivery.
- MC licence providers Compare MC licence course prices and delivery.
- skid steer ticket providers Compare skid steer ticket course prices and delivery.
- loader ticket providers Compare loader ticket course prices and delivery.
- dump truck ticket providers Compare dump truck ticket course prices and delivery.
- dozer ticket providers Compare dozer ticket course prices and delivery.
- telehandler ticket providers Compare telehandler ticket course prices and delivery.
- chainsaw ticket providers Compare chainsaw ticket course prices and delivery.
- gas test atmospheres providers Compare gas test atmospheres course prices and delivery.
- breathing apparatus providers Compare breathing apparatus course prices and delivery.
- silica awareness providers Compare silica awareness course prices and delivery.
- asbestos awareness providers Compare asbestos awareness course prices and delivery.
- Plan your tickets Work out which certifications to get first for the role you want.
- How to get into mining The steps from no experience to a first mine site job.