Dump Truck Ticket: Cost, Length and Providers
A dump truck ticket is a statement of attainment for the haul truck units RIIMPO337 (articulated) or RIIMPO338 (rigid), not a national high risk work licence. Across 10 providers, published prices run $650 to $1,500, usually 1 to 2 days. The units say no licensing requirements apply, so check your state regulator and what your site accepts.
Last checked 10 October 2026. Rules and prices change, so confirm with the regulator or provider before you book.
Key facts
- Unit code
- RIIMPO337 and RIIMPO338
- Price range
- $650 to $1,500 (9 published prices)
- Typical length
- Usually 1 to 2 days. Civil Safety adds online theory to finish within 30 days before a practical day, and RMS Training adds up to 6 hours of online pre-learning before a 1 day practical.
- Expiry
- No national expiry is set for the units. Employers and sites often ask for a verification of competency (VOC), commonly every 2 to 3 years or when you start a new job.
- Providers compared
- 10
- Last checked
- 10 October 2026
How much does a dump truck ticket course cost?
Published prices run $650 to $1,500 across 9 of the 10 providers we compared. Each figure comes from the provider’s own course page on 10 October 2026. See every provider, sorted cheapest first.
What are the rules for dump truck ticket?
RIIMPO337 Conduct articulated haul truck operations is the current national unit (Release 1, training.gov.au document generated 2 September 2026). It supersedes and is equivalent to RIIMPO337E, and applies to front and rear dumping articulated haul trucks in operational roles.
Source: training.gov.auRIIMPO338 Conduct rigid haul truck operations is the current national unit (Release 1, training.gov.au document generated 2 September 2026). It supersedes and is equivalent to RIIMPO338E.
Source: training.gov.auThe RIIMPO337 unit states under licensing and regulatory information that no licensing, legislative or certification requirements apply to the unit at the time of publication.
Source: training.gov.auThe RIIMPO338 unit states under licensing and regulatory information that no licensing, legislative or certification requirements apply to the unit at the time of publication.
Source: training.gov.auWestern Australia: the WA Government high risk work licensing page lists forklifts, cranes, boilers, hoists, reach stackers, reciprocating steam engines, rigging, scaffolding and turbines. Dump trucks and haul trucks are not named.
Source: www.wa.gov.auVictoria: WorkSafe Victoria states that you do not need a high risk work licence to operate earthmoving equipment (eg excavator).
Source: www.worksafe.vic.gov.auNew South Wales: SafeWork NSW states that high risk work licences are no longer required for earth moving plant such as excavators, front end loaders and bulldozers, leaving the onus on the PCBU to ensure the competency of the operator.
Source: www.safework.nsw.gov.auCivil Safety sells its haul truck courses as a blended format: an online theory module to finish within 30 days, then a practical day. Its pages show 1 day for the practical in WA and 2 days in QLD, and fees that vary by location.
Source: civilsafety.edu.auRMS Training runs its rigid haul truck course as up to 6 hours of online pre-learning plus a one day practical on a CAT 773E (60 t) at a quarry in WA. The page lists a minimum age of 18 and says a C class licence is required.
Source: rmstraining.com.auSaferight sells its articulated and rigid haul truck courses on separate pages at different prices. For eligible WA workers under the Construction Training Fund (CTF), it shows a gap fee of $402 for articulated and $752 for rigid.
Source: saferight.com.auNoble Training Group lists its rigid haul truck course at $800 full fee and $200 subsidised for CSQ funded participants. It says the 1 day program is for existing construction or resource sector workers.
Source: www.nobletraining.com.auSaferight describes a verification of competency (VOC) as an assessment of whether a worker can already do a task safely. It says there is no nationally set VOC expiry, and many companies ask for one every 2 to 3 years or when you start a new job.
Source: saferight.com.au
dump truck ticket questions answered
What are the dump truck ticket unit codes?
There are two. RIIMPO337 Conduct articulated haul truck operations covers articulated haul trucks, and RIIMPO338 Conduct rigid haul truck operations covers rigid haul trucks. Both are current on training.gov.au and supersede the older E versions. Many provider pages still show the old codes (RIIMPO337E, RIIMPO338E and one RIIMPO337D), so confirm the code when you book.
How much does a dump truck ticket cost?
Across 10 providers, published prices run $650 to $1,500, as listed on each provider's own page and last checked 10 October 2026. Articulated and rigid courses are often priced separately, and some providers show no price. Funding and session location can change what you pay.
Is a dump truck ticket a high risk work licence?
No. Both units state that no licensing, legislative or certification requirements apply to the unit at the time of publication. The WA high risk work licensing page does not name dump trucks, WorkSafe Victoria says earthmoving equipment needs no HRWL, and SafeWork NSW says HRWLs are no longer required for earth moving plant. Check your state regulator and your site.
Articulated or rigid: which course do I need?
It depends on the truck you will drive. RIIMPO337 is for articulated haul trucks and RIIMPO338 is for rigid haul trucks. Saferight sells them as separate courses at different prices. Ask your employer or site which truck type they need before you book.
What is a VOC and will a site ask for one?
A verification of competency (VOC) checks you can already do the task safely. Saferight says there is no nationally set VOC expiry, and many companies ask for one every 2 to 3 years or when you start a new job. Ask your employer or site what they accept.
Is any funding available?
Some providers advertise it. Coal Train Training says its articulated course has funding under Construction Skills Queensland. Noble Training Group lists a $200 subsidised rate for eligible CSQ funded workers. Saferight shows CTF gap fees of $402 (articulated) and $752 (rigid) for eligible WA workers. Eligibility rules apply, so check with the provider.
Do I need a driver licence or a minimum age?
It varies by provider. RMS Training lists a minimum age of 18 and says a C class licence is required. Other providers list minimum ages from 16 (Australian Operator Training, Major Training Group) to 17 (Coal Train Training). Check the provider's page for your course.
Want the full walkthrough? Read our dump truck ticket guide.
Where to next
- Excavator ticket Excavator ticket cost, length and providers.
- Front end loader ticket Wheeled front end loader ticket cost, length and providers.
- Skid steer ticket Skid steer loader ticket cost, length and providers.
- Forklift licence Forklift high risk work licence cost, length and providers.
- Confined space course Confined space entry, often sold with gas testing.
- How to get into mining Which tickets and licences employers ask for when you start.
- White Card The general construction induction card, often asked for on mine construction and shutdown work.
- Standard 11 The generic induction required before working on a Queensland coal mine.
- Plan your tickets Work out which certifications to get first for the role you want.